Відео

Just picked mine up going to break her in tomorrow 😁

Bought them, after only a few uses the yellow ring holding the hose in broke. Oil got into the probe and is now visible on the screen. Really wanted these to be great, i like other Appion products, but these aren't it... especially for the cost.

Appion is great company. This is how every company should support their products…Thank you…

I was expecting seals to repair a leaking ball valve on the core removal tool. Why is this not part of this kit?

Are these demonstrations not on live equipment? Do the core depressors need adjustment to keep the refrigerant from spraying?

I bought the gauge kit and it kind of sucks.. 1500 Canadian for the kit.. everytime I plug the aux cable in for temp clamps or probes the sticker on the face of the gauges comes off because the hole isn’t big enough or something.. but why that’s a sticker is beyond me.. they don’t have the low loss fittings like the yellow jacket hoses.. the refrigerant will still spray all over the place if you don’t screw it on fast enough… which was pretty much the reason I bought it so I’m pretty disappointed in that. Also the last time I used the clamps the temperature was bouncing like 10 degrees back and forth so I don’t know how accurate those are. They don’t connect to mqhvac. The app is alright but it doesn’t show you different ways to diagnose the issue once you have everything plugged in. I wish I didn’t buy these.

My pump fell over while running and destroyed 4 blades off the fan, whoops

Recovery for what. Here we just let it go. No worries

great thanks for providing this video

Just got my kit... 50/50 so far.. I really wanted to loved them

Can you read microns accurately?

Is it normal for the angle fittings on the recovery machine to swivel like that when you pick up and move the machine?

What is the purpose of this tool??? Am I missing something?? Does this remove the valve core or just push it in???

Cost ?

Can these gaskets be used for the appion charging tee?

What’s the part number for the repair kit

Is there a list anywhere of the refrigerants included in the library?

This video confirms ill be replacing brand new vs the time, risk of damage and material cost of repair.

Sir How about the quick removal tool how to use it ..

Appion a melhor

Awesome video bro👍🏻👍🏻👍🏻 I got the same pump. Where did you get the kit and what’s the part number? My model and serial number has worn off.

Straightforward, concise, non-superfluous. User testable; user serviceble.

Can I do a nitrogen pressure test with that product?

G5 and the Tez-8 sound like they are coming apart right out of the box. Too many o rings to leak on the tez-8, debris tube always loose from being in the truck. Should be a metal threaded tube with a window to the clear tube inside

Remove the core on the 1/4, then run the test. This one is apples and oranges.

Does the app work on tablet

This was helpful thank you

Best products on the market

Mine keeps leaking! I even bought a new one and that now leaks a few weeks later! I take meticulous care of them with regular cleaning

That is good information. Do you know any companies that would make such a gauge?

You have made a 230V flavor of the unit?

Please link amazon repair 5 1/6 appion

🤘🏻 And you guys didn’t disappoint, step up from the ION gauges but still using thermistor style temp clamps like the older design but improved functionality with quick temp changes. Don’t have to worry about Bluetooth cutting out while looking directly at the gauges screen with all the info you need not having to worry about staying connected onto the app or it crashing/phone dying. This what I’ve been waiting for!

Just a note about the locking pliers needed to loosen and tighten the piston, the width of the jaws can only be 6mm wide to fit in the groove of the piston where the pliers clamp. I had to grind down the sides of the jaws of the 5 inch curved jaw locking plies for the tool to fit without damaging the piston.

would it be as efficient to use the speed y on the end of the valve core removal tool and run both hoses to the pump? or is two individual valve core tools with one dedicated hose better?

would it be as efficient to use the speed y on the end of the valve core removal tool and run both hoses to the pump? or is two individual valve core tools with one dedicated hose better?

would it be as efficient to use the speed y on the end of the valve core removal tool and run both hoses to the pump? or is two individual valve core tools with one dedicated hose better?

Đã đặt hàng chưa rõ chất lượng ra sao. Chắc chắn đó là một sản phẩm tốt

That was wild

Why do I have so much pressure escaping from hose once I unscrew from recover tank?

Great video tutorial ❤ thank you for sharing your knowledge and experience 🇵🇭🫡

Can I use the C5 twin to just pull a vacuum on my truck ac system

My pump is starting to sound really rough.

No magnet?

I’m huge supporter of appion products. Double this probe and add refrigerant probes and clamps to the mix you got your self a system performance probe set. I’m curious and hope this is the starting point to the new line of appion wireless probe system. Edit. I am still using the ion probe sets with clamps still functioning well it’s been about 5 years.

Are you wearing a zoom recorder? Either way great audio and equally great content. Thank you.

Hi, I see this is rated to 20 microns. Is the CTEE14 also rated to 20 microns? Thanks

En México donde las consigo

My supervisor been in the field for years and he is against vacuum set up involving core removal tool. I just bought a simple set up with two appion crt and two appion 3/8 hoses. Follow ACserviceTech instructions and was able to pull a vacuum within 30 min and held below 250 microns. Great product Appion and will continue to use your product in the future.

What's the secret to catching the Schrader... I've used this tool and had crushed gaskets. They don't grab and feel like a regular Schrader tool why?